Traynor Am Custom

$1,399.00 $999.98

0 review  |  Write a review

Traynor Am Custom

The AM Custom is the flagship acoustic instrument amplifier in the Traynor line. Designed to be the ultimate “side man’s” amp, the AM Custom delivers 225 watts of clean tone through the integrated long-excursion 8-inch woofer and dual neodymium dome tweeters and integrated mixer.

Three input channels, including an XLR microphone in with 48v phantom power for condenser microphones, make the AM Custom an ideal solution for acoustic guitar, dobro, mandolin, violin and other acoustic instruments . Full 4-band EQ’s with notch filters to control feedback on three channels ensure maximum versatility. An additional RCA auxiliary input allows direct connection of a CD or MP3 player without tying up a valuable input channel. On board 24-bit digital multi-effect processors with modify controls complete the system.


Three Input Channels

Additional Auxiliary RCA CD/MP3 Input

48v Phantom Power on Channel Three (Mic In) for Condenser Microphones

225-Watts Total Power

8-Inch Woofer (with 2-Inch Voice Coil)

Two 2-Inch Neodymium Dome Tweeters (Angled for Enhanced Directivity)

Shared 24bit Digital Effects on Channels 1 & 2 (Footswitchable EFX Defeat Channel 1 & 2)

Separate Footswitchable 24-Bit Digital Effects on Channel 3 (Mic In)

XLR Pre-EQ Di Output with Ground Lift

Post-EQ Line Output

Solid Plywood Cabinet Construction

All-Metal Grille Protects Speaker Components


Power @ min.  impedance (Watts)  225

Burst Power – 2 cycle            250

Speaker Configuration – LF (Size / Power)            150 watt, 2-inch voice coil, 8-inch woofer

Speaker Configuration – HF (Size / Power)            2 X 1-inch Neo Dome Tweeter

Frequency Response (Hz +/-3dB)    50 – 20kHz

Hum and Noise (dB) -98

Inputs 4 + Aux

Channel 1 – Inputs    1

Channel 1 – Controls Gain, 4 band tone control, Digital Effects

Channel 1 – Switches Notch

Channel 2 – Inputs    1

Channel 2 – Controls Gain, 4 band tone control, Digital Effects

Channel 2 – Switches Notch

Channel 3 – Inputs    1

Channel 3 – Controls Gain, 4 band tone control, Digital Effects

Channel 3 – Switches Notch

Channel 4 – Inputs    1

Channel 4 – Controls Gain (Post Master Volume Monitor Channel)

Channel 5 – Inputs    RCA (pre Master Volume)

Master Volume Control        Yes

Input Sensitivity (mV)           ch1/100, ch2/100, ch3/100, ch4/100

Master Outputs         No

Line Out (type / configuration)        1/4-inch jack post EFX / XLR Pre EFX

Line Out Sensitivity (Vrms)  1

Effects Volume          Wet/Dry Control

Effects Loop / Location        Inserts on Channels 1-3

Effects Footswitch / Function            ch1/2 and ch3

Effects Return Sensitivity (Vrms)    0.5

Internal Reverb / Effects      16 modifiable 24 bit Digital Effects

LED Indicators         Power, Clip

Protection       Effects Input Limiter, Clip Limiter

External speaker output / location   No

Headphone Jack        No

Dimensions (DWH, inches)   12.5 x 20 x 13

Dimensions (DWH, cm)        50.8 x 32 x 33

Weight (lbs / kg)        35 / 15.9

Specifications subject to change without notice


There are no reviews yet.

Be the first to review “Traynor Am Custom”