JBL EON 210P

$999.99

0 review  |  Write a review
CompareCompare

JBL EON 210P
Portable Self-Powered 10” Two-Way system with detachable powered mixer

The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown® Class-D power amplifier and integrated mixer.

Features:

300 watts High-Performance Powered Speaker System

Ergonomic soft touch top grip for easy handling

10” low-frequency driver with neodymium magnet for low-distortion and light weight

1” throat diameter next generation JBL neodymium compression driver

Efficient Crown® Class-D amplifier technology

100° H x 60° V asymmetrical wave guide for uniform audience coverage

8 channel powered mixer with intuitive interface

On board digital multi-effects

Integrated 36 mm pole mount socket with stabilizing securing screw

Highly designed composite enclosures for durability, lightweight, and acoustic performance

Specifications :

System Power Rating               :         300 Watts (2 X 150 Stereo)

Maximum SPL Output             :         124 dB peak system output (pink noise)

Net Weight of System               :         33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)

System Type     :         Powered mixer with 2 two-way bass-reflex enclosures

Frequency Range (-10 dB)       :         60 Hz – 20 kHz

Frequency Response (±3 dB)   :         75 Hz – 19 kHz

AC input           :         120 – 240 V 50/60 Hz, voltage selector switch sets operational range

Amplifier Design           :         Crown® Class D

Output Connector        :         2 X 1/4” TS (unbalanced) amplifier outputs

Input Connectors          :         8 inputs (4 Mono Mic/Line, 2 X Stereo)

Channels           :         1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack

Input Impedance           :         Ch 1-4 Combo: XLR 3 K Ohms Balanced

Ch 1-4 Combo:       TRS 20 K Ohms Balanced

Ch 5-6:      TRS 25 K Ohms Balanced

Ch 5-6:       RCA 12 K Ohms Unbalanced

Ch 7-8:        3.5 mm 30 K Ohms Unbalanced

Phantom Power            :         30 V

Output Connectors       :         Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)

Headphone output:      one 3.5 mm stereo jack

Signal Indicators

Main Output LED Ladder       :         Limit: Red LED indicates limiter active condition

Signal:        Green LED indicates signal present

Signal Indicators: Ch 1-4         :         Peak LED: Green = signal present, Red = input overload

EQ         :         Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost

System Limiter             :         On Board DSP Limiting and Tuning

LF Driver         :         1 x JBL 328 H 250 mm (10 in) woofer

HF Driver         :         1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium compression driver

Coverage Pattern         :         100º x 60º nominal

Crossover Frequency               :         2 kHz

Crossover Type            :         Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters

Enclosure          :         Polypropylene

Suspension/ Mounting               :         36 mm pole socket with stabilizing screw

Handles             :         One on top

Grille     :         Powder coated perforated steel

Shipping Package (HxWxD)   :         21.5” x 26” x 13.75” (546 mm x 660 mm x 349 mm)

Reviews

There are no reviews yet.

Be the first to review “JBL EON 210P”